INSTRUCTION MANUALAir Cleaner50-868PART NO. 410-09-651-0004 - 09-23-02Copyright © 2002 Delta MachineryESPAÑOL: PÁGINA 11To learn more about DELTA MA
10PARTS, SERVICE OR WARRANTY ASSISTANCEAll Delta Machines and accessories are manufactured to high quality standards and are serviced by a net-work of
The following are trademarks of PORTER-CABLE·DELTA (Las siguientes son marcas registradas de PORTER-CABLE S.A.): Auto-Set®, BAM-MER®, B.O.S.S.®, Build
2ADDITIONAL SAFETY RULES FORAIR CLEANERS1. DO NOT USE THIS UNIT TO FILTER METAL DUST. Combining wood and metal dust can cre-ate an explosion or fire h
313. DO NOT ATTEMPT TO REMOVE OR REPLACE THE FILTER(S) WHILE THE UNIT IS RUNNING. Make certainthat the unit is disconnected from the power source.14.
INTRODUCTIONModel 50-868 Delta Air Cleaner is specifically designed to quietly circulate and filter non-metallic dustwhich is generated throughout the
5A - Air cleanerB - Four 1” eye-boltsC - Four 1/4-20 flange nutsD - Four rubber feetE - Remote Control Unit(Batteries not included)ABCFig. 2DEASSEMBLY
This machine weighs 50 pounds. When mounting overhead, be certain that the unit is secure-ly fastened and supported.6MOUNTING THE AIR CLEANER TO THE C
71. Locate the four 1" eye bolts and the four 1/4-20flange nuts supplied with the unit.2. Use a 5/32” Allen wrench (not supplied) to removethe fo
8Fig. 7AUSING THEREMOTE CONTROLTo reduce the risk of fire or electricshock, do not use this unit with any solid-state speedcontrol device. The remote
9MAINTENANCECHANGING AND CLEANING FILTERS1. To remove the outer first stage filter (A) Fig. 8, lift and pull out the bottom of the filter as shown.2.