Delta MultiChoice Valve Trim 13/14 Series User Manual download pdf (Page 16)

Cleaning and Care

Installation and Adjustment of the Temperature Knob

Failure to do so may cause injury.

17T Series Installation

Adjust temperature limit stop! Turn on

water supplies; let the water run at both

full hot and full cold to ensure the water is

running as hot/cold as possible. Place a

thermometer in a plastic tumbler, and hold

the tumbler in the water stream. Place the

temperature knob (1) onto the splines (2),

then rotate the temperature knob until

you achieve your maximum desired

temperature from the outlet (not more

than 120° or the lower temperature

mandated by your local plumbing code).

Remove the temperature knob and replace

onto the splines (2), making sure that the

temperature knob limit stop (3) hits against

the volume handle limit stop (4) as shown.

Secure volume handle with set screw (5).

Secure the temperature knob using screw

(6) and place cap (7) on knob.

Care should be given to the cleaning

of this product. Although its ﬁnish is

extremely durable, it can be damaged by

harsh abrasives or polish. To clean, simply

wipe gently with a damp cloth and blot dry

with a soft towel.

Warning: Scrubbing Bubbles

Bathroom

Cleaner and Lysol

Basin Tub and Tile

Cleaner must not be used on the clear knob

handles and levers. Use of these cleaners

can result in cracked or severely damaged

handles. If overspray gets onto the handles,

immediately wipe them dry with a soft

cotton cloth

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 85 86

No comments

Delta MultiChoice Valve Trim 13/14 Series User Manual Page 16