Delta D25886 User Manual Page 195

  • Download
  • Add to my manuals
  • Print
  • Page
    / 339
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 194
4. Motion Control Instruction
4-154 DVP-MC operating manual
4.7.7. Flying Shear Technology
Flying shear is the technology to cut the material in transmission vertically. The slave axis starts to accelerate
from the wait position. After its speed is up to the synchronous speed, the follower of the lead screw and
material move at the same speed; they are relatively static; the Insync bit is on and the shear axis is triggered
to control the shear to do the cutting upward.
The structure figure of flying shear is shown as follows.
After the cutting is completed, the shear will return to the motor box first and then slave axis will return to the
wait position. In continuous cutting, these actions will be executed in cycles.
The flying shear function is applied in cutting of the thick material usually.
Shear
Feed roller
Material
Lead screw
Follower of
lead screw
Motor box
Motor
DVP10MC11T Shear
axis
Slave
axis
Master
axis
Page view 194
1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 338 339

Comments to this Manuals

No comments