Delta 50-760 User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
12 - English
For operator safety, do not operate the machine with any dust intake holes uncovered. The rotating
fan, located inside the blower housing, is accessible through the dust intake port and can be hazardous. Always
wear proper apparel. Do not wear jewelry. Keep your fingers and all foreign objects out of the dust intake port.
Follow the safety rules in this manual.
1. The on/off switch (A) Fig. 15 is located on the motor housing. To turn the machine “ON”, move the switch up to
the “ON” position.
2. To turn the machine “OFF”, move the switch (A) down to the “OFF” position.
Make sure that the switch is in the “OFF” position before plugging in the power cord. In the event of a
power failure, move the switch to the “OFF” position. An accidental start-up can cause injury.
When using this dust collector, do not pick up anything that is burning, smoldering, or smoking
(matches, cigarettes, or hot ashes).
Do not use this unit to vacuum combustible explosive materials (coal, grain, or other finely-
divided combustible material).
Do not use this unit to vacuum hazardous, toxic, or carcinogenic materials (asbestos, pesticide,
or lead-based paint debris).
OPERATION
OPERATIONAL CONTROLS AND ADJUSTMENTS
STARTING AND STOPPING THE DUST COLLECTOR
IMPORTANT: When the tool is not in use, the switch should be locked in the “OFF” position to prevent
unauthorized use. To lock the machine, grasp the switch toggle (A) Fig. 16 and pull it out of the switch (B). With the
switch toggle (A) removed, the switch will not operate. However, should the switch toggle be removed while the saw is
running, the machine can be turned “OFF,” but cannot be restarted without re-inserting the switch toggle (A).
LOCKING THE SWITCH IN THE “OFF” POSITION
TROUBLESHOOTING
For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the
DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).
Fig. 15
Fig. 15
Fig. 16
Fig. 16
A
B
A
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comments to this Manuals

No comments