Delta A15097 User Manual download pdf (Page 13)

DUST INTAKE HOSE TO MOTOR

AND BLOWER ASSEMBLY

Disconnect machine from power source

before connecting or disconnecting an

air intake hose to or from the blower and motor

assembly.

The dust collector is supplied with a 4" flexible dust

intake hose. Place the intake cap holder (E) on the dust

collector as shown in Fig. 17. NOTE: DO NOT COVER

THE INTAKE PORT WITH THE INTAKE CAP WHEN

ATTACHING THE HOSE TO THE INTAKE PORT.

To assemble the dust collection hose to the motor and

blower assembly, loosely attach hose clamp (A) Fig. 17,

around one end of flexible hose (B) and assemble the

hose to dust intake port (C). Tighten hose clamp (A)

Fig. 18. Assemble the remaining clamp to the other end

of the flexible hose and to the woodworking machine.

IMPORTANT: Do not operate the dust collector without

the flexible hose assembled to the dust intake port.

Fig. 17

Fig. 18

Fig. 19

Fig. 20

OPERATION

For operator safety, make certain the dust intake port is covered with the hose before operating the machine.

The rotating fan inside the blower housing is accessible through the dust intake port and is hazardous. Make sure intake cap

covers the intake port when hose is removed. Always wear proper apparel. Do not wear jewelry and keep fingers and all foreign

objects out of the dust intake port. Always follow the safety rules of this manual.

STARTING AND STOPPING DUST

COLLECTOR

Make sure that the switch is in the

“OFF” position before plugging cord into outlet. Do

not touch the plug’s metal prongs when unplugging

or plugging in the cord.

The on/off switch (A) Fig. 19 is located on the side of the

motor. To turn the machine "ON", move the switch up to

the "ON" position. To turn the machine "OFF", move the

switch (A) down to the "OFF" position.

LOCKING SWITCH IN "OFF" POSITION

IMPORTANT: When the machine is not in use, the

switch should be locked in the "OFF" position to

prevent unauthorized use. To lock the machine, grasp

the switch toggle (A) and pull it out of the switch (Fig. 20).

With the switch toggle (A) removed, the switch will not

operate. However, should the switch toggle be removed

while the motor

is running, the machine can be turned

"OFF," but cannot be restarted without re-inserting the

switch toggle (A).

In the event of a power outage (such

as a breaker or fuse trip), always move the switch to

the “OFF” position until the main power is restored.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Comments to this Manuals

No comments

Delta A15097 User Manual Page 13

Comments to this Manuals

Related products and manuals for Air equipment Delta A15097