Delta A15097 User Manual download pdf (Page 9)

ASSEMBLY TOOLS REQUIRED

1/2” and 9/16” Wrench, Open-End or Socket

ASSEMBLY TIME ESTIMATE

Assembly for this machine takes approximately 1-2 hours.

CASTERS

1. Locate the bag of hardware with the four 3/8 hex

nuts and four 3/8 lockwashers for the four casters.

2. For each wheel, insert bolt from caster through the

holes (A) Fig. 3 in the base of the dust collector

(three are not shown).

3. Place a 3/8 lockwasher (A) Fig. 4 onto each bolt.

4. Thread 3/8 hex nut (B) Fig. 4 onto each of the four

bolts and tighten securely.

Fig. 3

Fig. 4

ASSEMBLY

For your own safety, do not connect the machine to the power source until the machine is

completely assembled and you read and understand the entire instruction manual.

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from

unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.

Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your

machine.

After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

No comments

Delta A15097 User Manual Page 9