Delta Oil-Free 66-651 User Manual download pdf (Page 19)

19- ENG

D26195

TROUBLESHOOTING

Performing repairs may expose voltage sources, moving

parts or compressed air sources, moving parts or

compressed air sources. Personal injury may occur. Prior to attempting

any repairs, unplug the air compressor and bleed off all air tank air

pressure.

PROBLEM

CAUSE

CORRECTION

Pressure switch does not

shut off motor when

compressor reaches "cut-

out" pressure.

Pressure switch "cut-out"

too high.

Move On/Auto/Off lever to

the "OFF" position, if the

outfit does not shut off

contact a Trained Service

Technician.

Contact a Trained Service

Technician.

Excessive tank

pressure - safety

valve pops off.

Tube fittings are not tight

enough.

Tighten fittings where air can

be heard escaping. Check

fittings with soapy water

solution. Do Not

Overtighten.

Air leaks at

fittings.

Air leaks at

pressure switch

release valve.

Defective pressure switch

release valve.

Contact a Trained Service

Technician.

Air leaks in air

tank or at air

tank welds.

Defective air tank. Air tank must be replaced.

Do not repair the leak.

Do not drill into, weld or

otherwise modify air tank

or it will weaken. The tank

can rupture or explode.

Air leaks

between head

and valve plate.

Leaking seal.

Air leaks at or

inside check

valve

Check valve seat damaged. A defective check valve

results in a constant air leak

at the pressure release valve

when there is pressure in the

tank and the compressor is

shut off. Replace check

valve. Refer to the "To

Replace or Clean Check

Valve" in the "Service and

Adjustment" section.

Contact a Trained Service

Technician.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments

Delta Oil-Free 66-651 User Manual Page 19

Comments to this Manuals