Delta 50-870 Instruction Manual download pdf (Page 5)

ASSEMBLY INSTRUCTIONS

Determine whether the Air Cleaner will be used on the floor, on a bench, or hanging from overhead. If the Air

Cleaner will be used as a mobile unit, proceed to “USING THE AIR CLEANER ON A BENCH OR FLOOR

SURFACE” section. If ceiling mounting is desired, proceed to section “MOUNTING THE AIR CLEANER TO A

CEILING OR OVERHEAD SUPPORT.”

IMPORTANT: When determining where to mount the air cleaner, always select a location where the air flow

is unrestricted. Do not locate the unit in a corner or near any heating or cooling vents.

USING THE AIR CLEANER ON A BENCH OR

FLOOR SURFACE

1. Locate four (4) self-adhesive rubber feet (A) Fig. 3

supplied with the unit. Carefully place the air cleaner on

a firm supporting surface with access to the bottom of

the cabinet (Fig. 3). Apply a self-adhesive rubber foot (A)

Fig. 3 to the bottom at each corner of the air cleaner

cabinet. The rubber feet will help eliminate vibration and

will prevent the possibility of the air cleaner “walking”

across the work or floor surface.

For operator safety, clamp the unit to a work bench

or position it securely on sawhorses.

Fig. 3

2. The air cleaner has convenient lifting handles located on both sides of the cabinet (A) Fig. 4. To avoid damage to

the air filters, carry the air cleaner with the filters positioned away from your body. CAUTION: This unit weighs 85

pounds.

Fig.4

1 2 3 4 5 6 7 8 9 10 11

No comments

Delta 50-870 Instruction Manual Page 5