Delta AP-100 User Manual download pdf (Page 34)

ARRANCADORES

1. Para quitar el arrancador (A) Fig. 11, gírelo (A) en sentido contrario al de las agujas del reloj hasta que se detenga o tope,

después tire del arrancador para sacarlo.

2. Introduzca un arrancador nuevo alineando las dos clavijas (B) Fig. 12 ubicadas en el extremo del arrancador con los

dos orificios (C) del porta arrancador. Gire el arrancador en el sentido de las agujas del reloj hasta que se detenga.

clockwise until it stops.

NOTA: Este dispositivo se suministra con arrancadores fluorescentes estandar (FS-2).

KEEP THE UNIT CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp

cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear certified safety equipment for eye, hearing and respiratory protection while using compressed air.

FAILURE TO START

Should your unit fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet.

Also, check for blown fuses or open circuit breakers in the line.

Desconecte la máquina de fuente de energía.

Fig. 12

Fig. 11

1 2 ... 29 30 31 32 33 34 35 36

No comments

Delta AP-100 User Manual Page 34