Delta AP200 User Manual download pdf (Page 3)

ADDITIONAL SAFETY RULES

FOR AIR CLEANERS

1. DANGER: DO NOT USE THIS UNIT TO FILTER METAL DUST. Combining wood and metal dust can create

an explosion or fire hazard. This unit is intended to filter non-explosive atmospheres only.

2. WARNING: DUST GENERATED BY CERTAIN WOODS AND WOOD PRODUCTS CAN BE HAZARDOUS TO

YOUR HEALTH.

3. WARNING: DO NOT USE THIS UNIT TO DISSIPATE FUMES OR SMOKE. This air cleaner is intended for use

where only dry airborne dust is present. Its use should be limited to non-explosive, non-metallic atmospheres.

4. DO NOT OPERATE THIS UNIT UNTIL IT IS COMPLETELY ASSEMBLED AND INSTALLED ACCORDING TO

THE INSTRUCTIONS.

5. OBTAIN ADVICE FROM YOUR SUPERVISOR, INSTRUCTOR, OR ANOTHER QUALIFIED PERSON if you are

not thoroughly familiar with the operation of this unit.

6. FOLLOW ALL WIRING CODES and recommended electrical connections.

7. DO NOT LIFT THIS UNIT BY THE POWER CORD. Do not use the power cord as a hanging device.

8. SECURELY ANCHOR THIS UNIT INTO A SUPPORTING STRUCTURE when suspending it from the ceiling.

Always keep a minimum of 7 feet between the bottom of the unit and the floor surface to allow for sufficient head

clearance. Use only a chain rated for a minimum of 150 lb. working load to adequately hold the unit. Use steel S-

Hooks that are at least 1/4" in diameter to suspend the unit from the ceiling. Lag-type bolts used suspend the unit

from the ceiling must be threaded at least 1-1/2" into supporting structural members.

9. SUPPORT THIS UNIT OR SECURELY CLAMP IT TO THE WORK SURFACE WHEN IT IS USED IN A PORTABLE

APPLICATION to eliminate potential movement and/or damage from falling.

10. ENSURE THAT THE INTAKE AND EXHAUST AREAS ARE CLEAR PRIOR TO STARTING THE UNIT.

11. KEEP ARMS, HANDS, AND FINGERS AWAY FROM THE FAN. Avoid all exposure to rotating parts.

12. DO NOT OPERATE THIS UNIT WITHOUT THE FILTERS IN PLACE.

13. DO NOT ATTEMPT TO REMOVE OR REPLACE THE FILTER(S) WHILE THE UNIT IS RUNNING. Make certain

that the unit is disconnected from the power source.

14. MAINTAIN THE UNIT IN TOP CONDITION. Keep filters clean for optimum performance. Follow all instructions for

changing and cleaning filters.

15. STORE THIS UNIT IN A LOCATION that eliminates the potential of damage to the power cord. Safely store power

cord on the unit to eliminate tripping hazards.

16. TURN THE UNIT “OFF” AND DISCONNECT IT FROM THE POWER SOURCE before installing or removing

accessories, or when making repairs.

SAVE THESE INSTRUCTIONS.

Refer to them often

and use them to instruct others

1 2 3 4 5 6 7 8 ... 11 12

No comments

Delta AP200 User Manual Page 3