Delta AP200 User Manual download pdf (Page 5)

Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire extension cord which

has a 3-prong grounding type plug and matching receptacle which will accept the machine’s plug. When using an

extension cord, be sure to use one heavy enough to carry the current of the machine. An undersized cord will cause

a drop in line voltage, resulting in loss of power and overheating. Fig. D, shows the correct gauge to use depending

on the cord length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

EXTENSION CORDS

OPERATING INSTRUCTIONS

FOREWORD

The Delta ShopMaster Model AP200 Air Cleaner is specifically designed to quietly circulate and filter non-metallic dust

which is generated throughout the work area. The Air Cleaner is furnished with two filters: a disposable outer filter which

filters out 98% of particles five microns in size; and the secondary filter will capture 85% of dust particles of one micron

in size (one micron = one millionth of a meter). Breathing microscopic particles can be a potential health hazard;

therefore, filtering out microscopic dust particles of the mentioned sizes will make for a cleaner and safer environment.

This Air Cleaner will filter the air in a room measuring 20’ x 20’ x 8’ sixteen times an hour. If desired, multiple units can

be used to filter larger areas.

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from

all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,

gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household

floor paste wax.

NOTICE: THE MANUAL COVER PHOTO ILLUSTRATES THE CURRENT

PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS ARE REPRESENTATIVE

ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING OR

ACCESSORIES AND MAY BE INTENDED TO ILLUSTRATE TECHNIQUE ONLY.

Fig. D

MINIMUM GAUGE EXTENSION CORD

RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES

Ampere Total Length Gauge of

Rating Volts of Cord in Feet Extension Cord

0-6 115

up to

25 18 AWG

0-6 115 25-50 16 AWG

0-6 115 50-100 16 AWG

0-6 115 100-150 14 AWG

6-10 115

up to

25 18 AWG

6-10 115 25-50 16 AWG

6-10 115 50-100 14 AWG

6-10 115 100-150 12 AWG

10-12 115

up to

25 16 AWG

10-12 115 25-50 16 AWG

10-12 115 50-100 14 AWG

10-12 115 100-150 12 AWG

12-16 115

up to

25 14 AWG

12-16 115 25-50 12 AWG

12-16 115

GREATER THAN 50 FEET NOT RECOMMENDED

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Delta AP200 User Manual Page 5

Comments to this Manuals

Related products and manuals for Air purifiers Delta AP200