Delta AP200 User Manual download pdf (Page 9)

OPERATING CONTROLS

ON/OFF SWITCH

The Air Cleaner is equipped with an in-line rocker switch

(M) Fig.11, located on the power cord (N). To start or

stop the motor, press downward on the rocker switch.

NOTE: The switch has markings on the side to

determine the on/off position. We suggest that when

finished with the air cleaner, the switch be turned off

rather than unplugging the unit.

Fig. 11

OPERATIONS

1. NOTE: The air cleaner may produce a slight odor for

the first couple hours of operation due to the protective

coating which is applied to internal components. This

odor will dissipate and should be disregarded.

IMPORTANT: Never operate the air cleaner without

air filters in place.

2. Fig. 12 illustrates the air cleaner being used in bench-

top sanding applications.

Fig. 12

Fig.13

Fig.15

3. Fig. 13 illustrates the air cleaner being used in circular

saw applications.

4. Figs. 14 and 15 illustrate the air cleaner being used

in dry wall and basement cleaning applications.

CAUTION: We recommend that the air cleaner be

clamped, as shown, if using sawhorses as a supporting

surface.

Fig.14

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Delta AP200 User Manual Page 9