Delta D1600e User Manual download pdf (Page 8)

8- ENG

D27665

3. Connect wand to gun. Tighten

securely. See figure 5.

BEFORE STARTING

1. Move pressure washer to level

ground.

2. Make sure the ON/OFF switch is in

the OFF position

Figure 5

READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT

When using the high pressure setting, DO NOT allow the

high pressure spray to come in contact with unprotected skin,

eyes, or with any pets or animals. Serious injury can occur.

Your washer operates at fluid pressures and velocities high enough to penetrate

human and animal flesh, which could result in amputation or other serious injury.

Leaks caused by loose fittings or worn or damaged hoses can result in injection

injuries. DO NOT TREA

T FLUID INJECTION AS A SIMPLE CUT! See a

physician immediately!

Never pull water supply hose to move pressure washer. This

could damage hose and/or pump inlet.

Always

keep unit in a vertical position

DO NOT

use hot water, use cold water only.

Never turn water supply off while pressure washer motor is running or damage

to pump will result.

This unit is equipped with an automatic stop mode. When the trigger is released

the motor is shut off automatically. When the trigger is pressed again the motor

will automatically start. The time between release and engagement must not be

less than 4-5 seconds. DO NOT

leave the unit in automatic stop mode for more

than 15 minutes.

Stand on a stable surface

and grip gun/wand firmly with both hands. Expect

the gun to kick when triggered.

This pr

oduct is intended for intermittent use only. Operate pressure washer

one hour or less in a 2 hour period.

If you do not understand these precautions please call 1-866-422-4286 to

speak to a service representative for further instructions.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Delta D1600e User Manual Page 8