Delta D1600e User Manual download pdf (Page 9)

9- ENG

D27665

4. Connect gun to high pressure

hose. Tighten securely. See figure

6.

To reduce the risk of

electrocution, keep

all connections dry and off the

ground. Do not touch plug with wet

hands. Do not use if cord is

damaged.

5. Plug the unit into an appropriate

outlet that is properly installed and

grounded in accordance with all

local codes and ordinances. See

the GROUNDING paragraph.

6. Connect the high pressure hose to

the water outlet on the unit. The

water outlet is marked OUT. See

Figure 7.

7. Assemble quick-connect adapter

to water inlet. See Figure 8.

8. Connect the quick-connect to the

water supply hose. See Figure 8.

9. Connect quick-connect to quick

connect adapter at the water inlet.

See Figure 8.

Figure 7

Figure 8

STARTING YOUR PRESSURE

WASHER

NOTE: Make sure water supply is

turned on.

1. Disengage the safety catch as

shown in Figure 9. Depress trigger

to allow air to escape and to

discharge residual pressure in the

pipes.

2. With the trigger

depressed, place the

ON-OFF switch in the

On position. When

starting motor, always

keep the trigger depressed.

RECOMMENDED CLEANING

●

On vertical surfaces, work from the

bottom upwards.

●

Let the detergent sit for 1-2

minutes, DO NOT allow detergent

to dry.

●

To rinse detergent, apply the high

pressure jet, keeping the nozzle at

least 10 in. from the surface, work

from the bottom up.

Figure 9

Figure 6

NOTE: The water supply must

provide a minimum of 2 gallons per

minute.

10. Make sure high pressure hose and

water supply hose are securely

connected.

11. If you are applying a chemical or

cleaning solution see How To Use

Chemical Application Unit in

this section.

12. Turn water supply on.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments