Delta D28623 User Manual download pdf (Page 9)

9- ENG

D28623

The shipping plug must be removed and replaced with the

dipstick/oil plug before operating pressure washer.

7. Using a 17 mm wrench, remove shipping plug from

pump by turning it counterclockwise. Discard plug.

8. Remove dipstick/oil plug from plastic bag and install

into pump, tighten securely.

b. Push grommet into place.

c. Repeat steps until all grommets are assembled.

5. To Assemble Quick Connect Nozzles:

a. Remove five colored quick connect nozzles from plastic bag and insert

them into correct grommet. NOTE: Nozzles are color coded to match

colored nozzles on panel.

6. Add engine oil (supplied) to engine. Refer to Engine Owners Manual supplied

by engine manufacturer for correct procedure.

NOTE: There will be a slight amount of oil in the engine from factory testing.

NOTE: The high pressure pump was filled with oil at the factory. There is no need

to add oil at this time, see the Maintenance section of this manual for

Maintenance information.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

No comments

Delta D28623 User Manual Page 9