Delta DT2400CS User Manual download pdf (Page 17)

d. Before reconnecting cleaning solution hose to chemical injector barb fitting

make sure that any remaining cleaning solution has been completely

drained from the cleaning solution hose.

To rinse chemical using cleaning solution system tank

a. Turn control valve knob arrow to the

down (off) position.

b. Fill one of the cleaning solution

system tanks with clean water.

c. Turn control valve knob toward tank

with clean water.

d. Depress trigger to draw clean water

through chemical injection system to

rinse system thoroughly.

2. Turn engine off. See Engine Owner’s

Manual. NOTE: NEVER turn the water off

with the engine running.

3. Turn water source off.

4. Pull trigger on spray gun to relieve any

water pressure in hose or spray gun.

5. See Storage section in this manual for

proper storage procedures. NOTE:

Cleaning solution must be removed from

cleaning solution tanks if storing unit

longer than 30 days, see Storage section for correct procedure.

17- ENG

D27918

When performing maintenance, you may be exposed to hot

surfaces, water pressure, or moving parts that can cause

serious injury or death!

Before performing any maintenance or repair, disconnect spark plug wire, let

engine cool and release all water pressure. The engine contains flammable

fuel. DO NOT

smoke or work near open flames while performing

maintenance.

To ensure efficient operation and longer life of your pressure washer, a routine

maintenance schedule should be prepared and followed. If the pressure washer is

used in unusual conditions, such as high-temperatures or dusty conditions, more

frequent maintenance checks will be required.

ENGINE

Consult the Engine Owners Manual for the manufacturer's recommendations for

any and all maintenance.

NOZZLE CLEANING

If the nozzle becomes clogged with foreign matter, such as dirt, excessive

pressure may develop. If the nozzle becomes partially clogged or restricted, the

pump pressure will pulsate. Clean the nozzle immediately using the nozzle kit

supplied and the following instructions:

MAINTENANCE

Control Valve Knob

Tank to

be used

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Delta DT2400CS User Manual Page 17

Comments to this Manuals

Related products and manuals for Carwash Delta DT2400CS