Delta DT2400CS User Manual download pdf (Page 20)

20- ENG

D27918

DUAL TANK CLEANING SYSTEM

1. Turn control valve knob to the down (off) position.

2. Remove cleaning solution hose at chemical injector and pull through rear

shroud.

3. Place end of cleaning solution hose into a suitable container to drain

cleaning solution.

4. Turn control valve toward tank to be drained.

5. Repeat steps 3-4 to drain second tank.

6. Turn control valve knob to the down (off) position.

7. Fill tanks with clean water.

8. Turn valve toward tank and drain water from tank. Repeat on second tank.

NOTE: This will rinse cleaning solution tanks.

9. Feed cleaning solution hose between shroud and wheel bracket making sure

it is routed over the axle as shown. Reconnect cleaning solution hose to

chemical injector for future use.

Control Valve Knob

Axle

Hose

1 2 ... 15 16 17 18 19 20 21 22 23 24

No comments

Delta DT2400CS User Manual Page 20