Delta 36-5000 Instruction Manual download pdf (Page 9)

100

UNPACKING

• The machine is heavy, two people are required to

unpack and lift.

• Use a safety strap to avoid tip over when lifting

machine.

• Prior to tool assembly and use, read this manual

thoroughly to familiarize yourself with proper

assembly, maintenance and safety procedures.

Check shipping carton and machine for damage

before unpacking. Carefully remove components in

top foam layer. Remove the top layer of foam then

remove all components in the bottom layer of foam.

Lay out all parts on a piece of cardboard or other

clean, flat surface. Two or more people are needed to

lift the saw out of the carton. Always check for and

remove protective shipping materials around motors

and moving parts. Do not discard shipping carton and

packing materials until you have carefully inspected the

contents, assembled the machine and are satisfied that

it operates correctly.

Compare package contents to Component Parts List

and Hardware Package List prior to assembly to make

sure all items are present. Carefully inspect parts to

make sure no damage occurred during shipping. If

any parts are missing, damaged or preassembled, do

not assemble. Instead, call DELTA

Customer Care at

1-800-223-7278 for assistance.

After assembly remove any protective materials and

coatings from all of the parts and the table saw. The

protective coatings can be removed by spraying

WD-40

on them and wiping them off with a soft cloth.

This may need to be redone several times before all of

the protective coatings are removed completely.

After cleaning, apply a good quality paste wax to any

unpainted cast iron surfaces. Make sure to buff out the

wax before assembly.

COMPONENT

PARTS LIST

DESCRIPTION (QTY)

1. Table Saw with attached

Carbide Blade, and Closed-

End Wrench (1)

2. Extension Wing

3. Switch Box (attached to

saw) (1)

4. Tubular Stand (2)

5. Support Panels (4)

6. Fixed Wheels (2)

7. Adjustable Feet (2)

8. Pivoting Pedal and Caster

(not shown) (attached to

saw) (1)

9. Handwheel Handles (2)

(attached to saw)

10. Lock Knobs (2)

11. Miter Gauge (1)

12. Rip Fence Handle (1)

13. Extension Wing (2) with

36-5000 and 5100

(1) with 36-5052 and

36-5152

14. Rip Fence (1)

15. Throat Plate (1)

16. Blade Guard and

Anti-Kickback Pawls

17. Blade (1)

18. Push Stick (1)

Component Callouts

These contents in

separate carton

19. Rear Rail

20. Fence Guide

21. Front Fence Rail

These contents in separate carton

for 36-5052 and 36-5152 only

22. Wood Table Extension

23. Legs

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 99 100

Comments to this Manuals

No comments

Delta 36-5000 Instruction Manual Page 9

Comments to this Manuals

Related products and manuals for Circular saws Delta 36-5000

Verwandte Produkte und Handbücher für Kühlschränke Zanussi 728530