Delta 36-902 Instruction Manual download pdf (Page 11)

ASSEMBLING UNIFENCE

BODY TO GUIDE RAIL

1. Turn fence body (A) Fig. 34, upside down and lay it

on a table or bench. Push handle (B) in against fence

body. Make certain the surface (C) of clamp bracket is

parallel to the face (D) of the fence body, and that the

inside edge (E) of the clamp bracket is parallel to surface

(F) of the fence body. Turn handle (B) Fig. 32, if

necessary.

2. Place fence body (A) Fig. 35, onto the guide rail as

shown, making sure clamp bracket is inserted into

channel (G) on rail. Notice that the clamp handle (B) is

turned to the left indent position.

3. While pushing in on handle, turn to the right indent

position as shown in Fig. 36. This will prevent fence

clamp from sliding out of the channel (G).

4. Lock fence body (A) to the guide rail by pushing

down on handle (B) as shown in Fig. 37.

Fig. 34

Fig. 35

Fig. 36

Fig. 37

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

No comments

Delta 36-902 Instruction Manual Page 11