Delta 78-955 Instruction Manual download pdf (Page 10)

Fig. 27

24. There is an adjustment screw to achieve the desired

weight of the guard basket (M) Fig. 27, on the workpiece.

To make an adjustment, loosen locknut (V) Fig. 26, and

turn wing nut (W) clockwise to decrease the pressure or

counter-clockwise to increase the pressure. After the

desired pressure is achieved, tighten locknut (V).

25. Front to back movement of the blade guard basket (N) Fig. 27, is obtained by loosening locking knob

(R) and sliding basket body arm (N) in or out as desired. Always tighten locking knob (R) after adjusment

is complete. NOTICE: IT IS RECOMMENED THAT THE BACK OF HOOD ASSEMBLY (M) BE

POSITIONED 3/8” IN FRONT OF THE SPLITTER BLADE.

Fig. 26

1 2 ... 5 6 7 8 9 10 11 12

No comments

Delta 78-955 Instruction Manual Page 10