Delta 1.07 VFD-D D User Manual download pdf (Page 140)

Appendix B How to Select AC Motor Drive |DD Series

B-6

Special motors:

1. Pole-changing (Dahlander) motor:

The rated current is differs from that of a standard motor. Please check before operation and

select the capacity of the AC motor drive carefully. When changing the pole number the motor

needs to be stopped first. If over current occurs during operation or regenerative voltage is too

high, please let the motor free run to stop (coast).

2. Submersible motor:

The rated current is higher than that of a standard motor. Please check before operation and

choose the capacity of the AC motor drive carefully. With long motor cable between AC motor

drive and motor, available motor torque is reduced.

3. Explosion-proof (Ex) motor:

Needs to be installed in a safe place and the wiring should comply with the (Ex) requirements.

Delta AC Motor Drives are not suitable for (Ex) areas with special precautions.

4. Gear reduction motor:

The lubricating method of reduction gearbox and speed range for continuous operation will be

different and depending on brand. The lubricating function for operating long time at low speed

and for high-speed operation needs to be considered carefully.

5. Synchronous motor:

The rated current and starting current are higher than for standard motors. Please check before

operation and choose the capacity of the AC motor drive carefully. When the AC motor drive

operates more than one motor, please pay attention to starting and changing the motor.

Power Transmission Mechanism

Pay attention to reduced lubrication when operating gear reduction motors, gearboxes, belts and

chains, etc. over longer periods at low speeds. At high speeds of 50/60Hz and above, lifetime

reducing noises and vibrations may occur.

1 2 ... 135 136 137 138 139 140 141

No comments

Delta 1.07 VFD-D D User Manual Page 140