Delta DVPEN01-SL User Manual download pdf (Page 47)

Ethernet Communication Module DVPEN01-SL

DVP-PLC Operation Manual

4. Switch to “Select Recipients” page. Check all the boxes of “Recipient 1”. Click on “OK” to complete

the setting.

5. After all the settings in DVPEN01-SL are completed, compile the ladder diagram in the MPU and

download it to the MPU. See below for the program design:

END

T0 K100 K3 K1

T0 K100 K1 K1

T0 K100

K1 K1

T0 K100

K1 K1

Explanations:

• If the rising-edge of X0 is triggered, X0 will go from Off to On. Write “1” into CR#3 of

DVPEN01-SL, and the first E-Mail will be sent out.

• If the falling-edge of X0 is triggered, X0 will go from On to Off. Write “1” into CR#4 of

DVPEN01-SL, and the second E-Mail will be sent out.

• If the rising-edge of Y0 is triggered, Y0 will go from Off to On. Write “1” into CR#5 of

DVPEN01-SL, and the third E-Mail will be sent out.

• If the falling-edge of Y0 is triggered, Y0 will go from On to Off. Write “1” into CR#6 of

DVPEN01-SL, and the fourth E-Mail will be sent out.

6.8 Application of Data Exchange (1)

Application Writing the time in RTC in PLC_B into D0 ~ D6 of PLC_A

Network

requirement

(1) Adopting static IP.

(2) IP of PLC_A: 192.168.0.4

(3) IP of PLC_B: 192.168.0.5”

(4) Update from PLC_B to PLC_A

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 57 58

No comments

Delta DVPEN01-SL User Manual Page 47