Delta OILLUBE AIR COMPRESSOR DLKC6580V2 User Manual download pdf (Page 24)

24-ENGD25235

PROBLEM

CAUSE

CORRECTION

Motor will not

run.

Fuse blown, circuit breaker

tripped.

1. Check fuse box for blown

fuse and replace as nec-

essary. Reset circuit

breaker. Do not use a fuse

or circuit breaker with

higher rating than that

specified for your particu-

lar branch circuit.

2. Check for proper fuse. You

should use a time delay

fuse.

3. Check for low voltage

conditions and/or proper

extension cord.

4. Disconnect the other elec-

trical appliances from cir-

cuit or operate the com-

pressor on its own branch

circuit.

Motor overload protection

switch has tripped.

Let motor cool off and over-

load switch will automatically

reset.

Tank pressure exceeds

pressure switch "cut-in"

pressure.

Motor will start automatically

when tank pressure drops

below "cut-in" pressure of

pressure switch.

Loose electrical connec-

tions.

Check wiring connection

inside pressure switch and ter-

minal box area.

Have checked by a Trained

Service Technician.

Check valve stuck open.

Remove and clean, or replace.

Possible defective motor

or starting capacitor.

Have checked by a Trained

Service Technician. Do not

operate the compressor in the

paint spray area. See flamma-

ble vapor warning.

Paint spray on internal

motor parts.

Bleed the line by pushing the

lever on the pressure switch to

the "off" position; if the valve

does not open, replace switch.

Pressure release valve on

pressure switch has not

unloaded head pressure.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments