Delta OILLUBE AIR COMPRESSOR DLKC6580V2 User Manual download pdf (Page 9)

9-ENG D252359-ENG D252359-ENG

2. Obtain the drain plug extension

(D), from the parts bag.

3. Apply thread sealant tape to the

threads of the drain plug exten-

sion (D).

4. Assemble the washer (C), drain

plug extension (D), and drain

plug (B) as shown in Figure.

5. Tighten securely.

6. Remove the oil fill plug (A.

7. Fill the crankcase with the rec-

ommended oil. NOTE: Use an air

compressor oil such as SAE-30

(API CG/CD heavy duty motor

oil). Under extreme winter condi-

tions use SAE-20 weight oil.

8. Replace the oil fill plug (A) and

tighten securely.

A

C

B

ASSEMBLY

Tools Required for Assembly

1 - 9/16" socket or open end wrench

1 - electric drill

Unpacking

1. Remove all packaging.

It may be neces-

sary to brace or

support one side of the outfit

when removing the pallet because

the air compressor will have a

tendency to tip.

2. Remove and discard the (4)

screws and washers holding the

compressor to the pallet.

3. With the help of another person

carefully remove air compressor

from pallet and place on a level

surface.

To Add Oil To Pump

Compressors are

shipped without oil.

A small amount of oil may be pres-

ent in the pump upon receipt of the

air compressor. This is due to plant

testing and does not mean the

pump contains oil. Do not attempt

to operate this air compressor

without first adding oil to the

crankcase. Serious damage can

result from even limited operation

unless filled with oil and broken in

correctly. Make sure to closely fol-

low initial start-up procedures.

Multi-Viscosity

motor oils, like

10W 30, should not be used in an

air compressor. They leave carbon

deposits on critical components,

thus reducing performance and

compressor life. Use air compr

es-

sor oil only.

1. Remove the oil drain plug (B) and

washer (C).

C

D

B

9-ENG

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 29 30

Comments to this Manuals

No comments