Delta 36-240 Instruction Manual download pdf (Page 23)

Fig. 66

10. If using the saw on a workbench (See Fig. 68) or on

saw horses (See Fig. 70), re-assemble the two table

extensions, one of which is shown at (J) Fig. 66, that

were removed in STEP 6. If you are using the saw on

2 x 4 wooden extensions (See Fig. 71), push in the four

table extension rods, two of which are shown at (O)

Fig. 66, and lock in place. In this case it is not necessary

to replace the table extensions (J).

FASTENING THE SAW TO A WORKBENCH

(FOR ALL MODELS)

Figs. 67 and 68, illustrate the slide saw fastened to a workbench. Holes provided in the base of the units (A) Fig. 67

and (B) Fig. 68, are used to mount the machines to a supporting surface using standard hardware. FOR MODEL

36-250 ONLY: Please note that the table extensions and auxiliary fences (A) Fig. 68, can also be used.

Fig. 67

Fig. 68

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 32 33

No comments

Delta 36-240 Instruction Manual Page 23