Delta 36-240 Instruction Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 33
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
Fig. AA Fig. BB
GROUNDED OUTLET BOX
CURRENT
CARRYING
PRONGS
GROUNDING BLADE
IS LONGEST OF THE 3 BLADES
GROUNDED OUTLET BOX
GROUNDING
MEANS
ADAPTER
Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire extension cord which
has a 3-prong grounding type plug and a 3-hole receptacle which will accept the tool’s plug. When using an extension
cord, be sure to use one heavy enough to carry the current of the tool. An undersized cord will cause a drop in line
voltage, resulting in loss of power and overheating. Fig. DD, shows the correct gauge to use depending on the cord
length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
EXTENSION CORDS
UNPACKING AND CLEANING
Your Sliding Compound Miter Saw is shipped in one carton. Carefully remove the machine and all loose items from the
shipping container. Remove the protective coating from all unpainted parts. This coating may be removed with a soft
cloth moistened with kerosene (do not use acetone, gasoline, or lacquer thinner for this purpose). After cleaning, cover
the unpainted surfaces with a good quality household floor paste wax. Figs. 2 and 3 illustrate the slide saw models
removed from the shipping carton. Fig. 4 illustrates the loose items supplied with your machine. IMPORTANT: Do not
remove the cable tie (A) Figs. 2 and 3 that is holding the cuttinghead in the down position until the machine is placed
on a workbench or the stand model has been set in an upright position.
NOTICE: THE MANUAL COVER PHOTO ILLUSTRATES THE CURRENT
PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS ARE REPRESENTATIVE
ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING OR
ACCESSORIES.
5
Fig. DD
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC TOOLS
Ampere Volts Total Length of Gauge of
Rating Cord in Feet Extension Cord
0-6 120 up to 25 18 AWG
0-6 120 25-50 16 AWG
0-6 120 50-100 16 AWG
0-6 120 100-150 14 AWG
6-10 120 up to 25 18 AWG
6-10 120 25-50 16 AWG
6-10 120 50-100 14 AWG
6-10 120 100-150 12 AWG
10-12 120 up to 25 16 AWG
10-12 120 25-50 16 AWG
10-12 120 50-100 14 AWG
10-12 120 100-150 12 AWG
12-16 120 up to 25 14 AWG
12-16 120 25-50 12 AWG
12-16 120
GREATER THAN 50 FEET NOT RECOMMENDED
HOLES
HOLES
OPERATING
INSTRUCTIONS
FOREWORD
Delta Model 36-240/250 is a 10" Sliding Compound Miter
Saw designed to cut wood. It can cut material up to 11
1
/2"
at
90° and 8" at 45° miter. The depth of cut is 3
5
/8" at 90°
and
2" at 45°. bevel. It has positive miter stops at 0°,
22.5°, 31.62°, and 45° degrees both left and right, and
positive bevel stops at 0° and 45° left. It also includes the
following features; D-handle design with trigger switch for
positive control, electric brake automatically stops blade
in seconds, automatic retracting see-thru blade guard,
built-in arbor lock for easy single wrench blade changes,
dust bag, built-in left and right table extensions with stock
stops, fence, table insert, stand, extra-long 10' cord and
carbide tipped blade.
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 32 33

Comments to this Manuals

No comments