Delta 36-729 User Manual download pdf (Page 2)

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may

result in property damage.

This manual contains information that is important for you to know and understand. This information relates to protect-

ing YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the

symbols to the right. Please read the manual and pay attention to these sections.

SAFETY GUIDELINES - DEFINITIONS

INTRODUCTION

The models T²-30 (30" capacity) and T²-50 (50" capacity), can be assembled to the 36-729 Cabinet Saw, Delta 10"

Professional Table Saws, Delta Contractors Saws, and Unisaws, in addition to other brands of table saws. The T² Fence

System includes the fence, guide tube, front guide rail, and rear guide rail.

FENCE PARTS

Fig. 2

1. Rear Guide Rail

2. Front Guide Rail

3. Guide Tube

4. 36-726 Fence

5. 3/8-24x1 1/4" Socket Head Cap Screw (2)

6. M8x1.25 x 30mm Flat Head Screw (2)

7. M8x1.25x16mm Hex Head Screw (6)

8. 8mm Lockwasher (10)

9. M8x1.25 Hex Nut (2)

10. 8mm Flat Washer (2)

11. 3/8” Lockwasher (4)

12. 3/8-24 Hex Nut (2)

13. 5mm Hex Wrench

14. 4mm Hex Wrench

NOTICE: THE MANUAL COVER PHOTO ILLUSTRATES THE CURRENT

PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS ARE REPRESENTATIVE

ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING OR

ACCESSORIES AND MAY BE INTENDED TO ILLUSTRATE TECHNIQUE ONLY.

ADDITIONAL HARDWARE FOR T

-30

WHEN USED WITH SAWS

WITH SHEET METAL WINGS

15 17

Hardware for the T

-30 when used with

saws with sheet metal extension wings

15. 3/8-24x1 1/4” Socket Head Cap Screw (2)

16. 3/8" Flat Washer (2)

17. 3/8" Lockwasher (2)

18. 3/8-24 Hex Nut (2)

19. M8x1.25 x 30mm Flat Head Screw (2)

20. 8mm Lockwasher (2)

21. 8mm Flat Washer (2)

22. M8x1.25 Hex Nut (2)

NOTE: The T

50 can’t be attached to saws using sheet

metal extension wings.

1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments

Delta 36-729 User Manual Page 2

Comments to this Manuals

Related products and manuals for Cordless chainsaws Delta 36-729