Delta NANOTRACE DF-745 Instruction Manual download pdf (Page 63)

User Interface DF-745 59

7.4.10.3 Test Analog Voltage Output

Figure 61: Test Analog Outputs Menu

The Test Output screen, as shown in Figure 62, is used to calibrate the analog recorder

output. When the Test Output screen is selected, the NEXT key is used to move to the

percentage field where the arrow keys ( and ) are used to choose the appropriate

setting. The NEXT key is then used to move to the Apply field where the Enter key is hit

to set the analog output to the selected value. The analog output response should match the

value that was entered. For example, if 80 percent is entered for the percent full scale level,

and the analog output is set for 0 to 10 VDC, the analog output is 8.000 VDC. This process

can be repeated as often as needed. When done, the NEXT key is used to move to the

Done field and the Enter key is hit to leave the screen. The condition of the analog output

before the test is restored when the test is concluded. See the section on analog outputs

found on page 32 for additional information.

Figure 62: Test Analog Voltage Output Screen

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 97 98

No comments

Delta NANOTRACE DF-745 Instruction Manual Page 63