Delta Embedded DVR User Manual download pdf (Page 131)

131

Figure 7-45

Important

The alarm output port should not be connected to high power load directly (It shall be less than

1A) to avoid high current which may result in relay damage. Please use the co contactor to

realize the connection between the alarm output port and the load.

Please refer to the following sheet for detailed information.

Parameter Function

Alarm output There are six output channels (Multiple choices).

Please note the displayed alarm output channel amount here may

vary due to the different series.

Activate Enable/disable alarm output device. After the Web activated the

alarm, you need to cancel the channel and then click the

activation button to cancel the alarm, or you need to cancel the

alarm in the pop-up dialogue box in local-end.

Refresh

Search alarm output status.

7.3.3.3 Record

Record control interface is shown as in X474H474H474HFigure 7-46X.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 161 162

No comments

Delta Embedded DVR User Manual Page 131