Delta Embedded DVR User Manual download pdf (Page 68)

4.9.4 Activate Patrol (tour)

In X341H341H341H Figure 4-39, input patrol (tour) number in the No. blank and click patrol button

4.9.5 Pattern Setup

In Figure 4-39, click pattern button and then click “begin” button. The interface is shown as in

Figure 4-43. Then you can go to Figure 4-36 X to modify zoom, focus, and iris.

Go back to Figure 4-43 and click “end” button. You can memorize all these operations as pattern

Figure 4-43

4.9.6 Activate Pattern Function

In X346H346H346H Figure 4-39, input mode value in the No. blank, and click pattern button.

4.9.7 Auto Scan Setup

In X347H347H347H Figure 4-38, click border button. The interface is shown as in X348H348H348H Figure 4-43.

Please go to

X349H349H349H X349H349H349HFigure 4-35, use direction arrows to select camera left limit

Then please go to

X350H350H350H Figure 4-43X and click left limit button

Repeat the above procedures to set right limit.

Figure 4-44

4.9.8 Activate Auto Scan

In Figure 4-40, click “Auto Scan” button, the system begins auto scan. Correspondingly, the auto

scan button becomes Stop button. Click stop button to terminate scan operation.

4.10 Flip

In Figure 4-40, click page switch button, you can see an interface is shown as below. See Figure

4-45. Here you can set auxiliary function. The aux value has relation ship with the Aux button of

the decoder.

Click page switch button again, system goes back to Figure 4-36.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 161 162

No comments

Delta Embedded DVR User Manual Page 68