5) PTZ
Configure Pan/Tilt/Zoom camera for control via DVR System and Remote client software
Driver: Select correct protocol for DVR unit to communicate with PTZ cameras.
Please contact PTZ camera manufacturer to find out the correct default protocol.
6) Controller
Setup the ID of remote control. If there are few DVRs present in one location, user can control each DVR
separately by using different remote control ID on each DVR.
Use the ID setup and number key to set the ID of remote control on the remote controller. User may check the
ID by pressing the remote control key. The ID should be the same between the DVR and remote control.
Comments to this Manuals