STATIONARY POWER TOOLS
50
657
• Powerful 1.5 HP motor
• Automatic feed reversing switch on carriage
• ASA-D1-4 Camlock spindle nose
• Ground gears in headstock
• Bedways are hardened and precision ground
• Comes c/w chuck plate, 6’’ - 3 jaw chuck, steady rest,
motor, chip tray, MT#3 centre, MT#5 centre, tool box,
spare gears, key spanners, thread cutting indicator,
4-way tool post, 10’’ face plate and 8’’ chuck plate
Specifications:
Order No. Mfg. No. Amp Voltage Weight
5009.00521 KC-1440GH 12 230V, 1 phase, 60 Hz 750 lbs.
• Powerful 7.5 HP motor
• Automatic threading and feeding are fully interlocked
• Automatic overload stop mechanism in the feeding system
• Bedways and gears in headstock are hardened and
precision ground
• Comes complete with chuck plates (D1-6), 14’’ face plate
(D1-6), 8’’ - 3 jaw chuck, 10’’ - 4 jaw chuck, steady rest,
follow rest, 6 way quick change tool post, 1- MT# 4 live
centre, 2-dead centers MT#4, MT#6 metric and imperial
dial, motor, stand with automatic footbrake, full length
splash guard, machine light, coolant system, gap bed and
taper attachment
Specifications:
Order No. Mfg. No. Amp Voltage Weight
5009.00500 KC-1640GH 11 600V, 3 Phase, 60 Hz 3600
5009.00503 KC-1660GN 2 600V, 3 Phase, 60 Hz 4000
14" x 40"
Gearhead
Engine Lathe
Gearhead
Engine Lathe
• Distance Between
Centres: 40"
• Height of Centres Over
Bed: 7"
• Swing Over Bed: 14"
• Swing Over Gap: 20-7/8"
• Spindle Bore: 1-1/2"
• Swing Over Cross Slide:
8"
• Headstock Taper: MT #5
• Tailstock Taper: MT #3
• Width of Bedways: 7-5/32"
• Total Travel of Cross
Slide: 6-7/8"
• Total Travel of Top Slide:
3-3/4"
• Range and Number of
Spindle Speeds: 12 RPM
(70-1350)
• Dia. and Pitch of Lead
Screw: 7/8" x 8 tpi
• Thread Cutting: 4-112 tpi
• Swing Over Bed: 16"
• Swing Overcross
Slide Bed: 10-1/4"
• Swing Over Gap: 23"
• Width of Bedways: 11"
• Spindle Bore Diameter: 2-
1/16"
• Taper in Headstock: MT
#6
• Range and Number of
Spindle Speeds: 16 RPM
(33-2000)
• Thread Cutting in Inches:
4-56 tpi
• Metric Thread Cutting:
0.457 mm
• Longitudinal Feed Range:
0.003"-0.045"
• Transversal Feed Range:
0.0026"-0.0366"
• Taper in Tailstock: MT #4
• Tailstock Centre Sleeve
Travel: 4"
• Tailstock Centre Sleeve
Diameter: 2-1/16"
• Distance between centres:
KC-1640 = 40"
KC-1660 = 60"
16" x 40" and 16" x 60"
Dust Control Units
for Baldor Grinders
• 115 volts, single phase, 60 Hz
• Air control valves
DC14-3+ Powered with 1hp TEFC 208-320/460 volt, three
phase motor, less cord, switch and plug.
Order Mfg. Grinding Wheel Maximum Total Capacity
No. No. Dia. (in) Width (in) per cubic ft/min
5009.00506 DC8 8 1 440
5009.00509 DC10 10 1 440
5009.00512 DC14-3+ 14 3 700
REPLACEMENT FILTER BAGS
5009.00515 ARB-1 Baldor dust bag 440
5009.00518 ARB-2 Baldor dust bag 700
GA14 Base
Formed steel for 6" to 8" and
10" grinders.
GA16 Base
For 6" to 8" and 10" grinders.
GA20 Base
For 8", 10", 12" and 14"
grinders and 3/4 through
7-1/2 hp buffers
Order No. Mfg. No. Height (in) Description
5009.00533 GA14 34-1/2 Grinder Base
5009.00536 GA16 32-7/8 Grinder Base
5009.00539 GA20 30 Grinder Base
Accessories
GA16 GA14
Lighted Eyeshield
Easy to attach to all Baldor grinders
Eyeshield
Fits Baldor 6" grinders #712, #172R,
#762 and #762R
Order No. Mfg. No. Length (in) Width (in)
5009.00524 GA9 5-1/2 3-3/4
5009.00527 GA10 5 4
5009.00530 GA11 6 4
Comments to this Manuals