Laminate Trimmer
• 5.6 Amps, AC/DC
• 30,000 RPM
• 1/4" collet
• Spindle lock
• Precision cast aluminum base
• Micro-set depth-of-cut adjustment knob
• 100% ball bearing construction
• Standard equipment: motor #7301,
standard trimmer base #7309, collet
wrench #44745, and operating manual
Order No. Mfg. No. P o w e r C o l l e t RPM
5029.00944 7310 120V 1/4 30,000
Deluxe Plate
Joiner Kit
• 7.5 amps, 120V
• Lock-on trigger
• Height scale accurate at any angle
• Fence tilts from 0° to 135° with positive adjustable stop at
90°
• Precise micro height-adjustment knob
• Includes both 2" and 4" diameter blades for standard and
face-frame biscuits
• Includes plate for centering stock to the 2" blade
• Seven-position rotating depth stop for FF, #0, #10, #20,
Simplex, Duplex, and Max (#6) biscuits
• Bale handle attached to fence, not motor, for greater sta-
bility and added control during cuts
• 1" O.D. dust port accepts standard bag or can be con-
nected to a vacuum for a clean work environment
• Includes plate joiner #5557, 2" blade #5559, 4" blade
#5558, centering plate #888776, spanner wrench
#886041, dust bag #883175, chip deflector #886490,
and operating manual
• Biscuit sizes: FF, #0, #10, #20, simplex, duplex, and #6
Order No. Mfg. No. Voltage RPM
5029.00950 5557 120V 10000
5029.00953 5558 4" blade, 6 tooth, carbide tipped
5029.00956 5559 2" blade, 4 tooth, carbide tipped
Heavy-Duty 7/8 HP
Laminate Trimmer
Fixed Base
• Precision-machined, cast aluminum
fixed base for increased accuracy
• Adjustable ball-bearing and plate guide
follower allow use with straight or tem-
plate work
• Tool-free base change, height and
edge guide adjustment
• Includes: 1/4" collet
Order No. Mfg. No. Amps HP RPM Spindle Lock
5029.00947 DW670 5.6 7/8 30,000 yes
Portable Thickness
Planer
Heavy-Duty 12-1/2"
• Only thickness planer with a four-col-
umn head lock that secures the cut-
terhead against four steel posts,
greatly reducing the movement that causes snipe
• Extra-long infeed and outfeed table provide 33" of materi-
al support
• Powerful 15.0 Amp motor
• 10,000 RPM cutterhead speed provides 64 cuts per inch
• turret depth stop allows the user to return to the most fre-
quently used thickness (1/4", 1/2", 3/4") quickly and easily
• Knives are made of M2 laminated high speed tool steel
• Knives can be resharpened multiple times
• Thickness scale, material removal gauge and graduated
depth crank make accurate planing easy
• Magnetic knife setting gauges and wrenches store
onboard for fast, easy and accurate knife changes
Order No. Mfg. No. Amps RPM Depth Cap. (in)
5029.00959 DW733 15.0 10,000 6
HE 2000 Hot Air Gun
Electronic 3-speed variable temper-
ature hot-air gun.
• Three air-flow rates
• Electronic control for progressive
temperature variation
Air Flow Air
Order No. Mfg. No. (CFPM) Temp. (˚C)
5029.00962 02 005 8.8/9.5/17.7 50 – 600
Heat Guns
• Double insulated
• Efficient soft air velocity
• Cool air inlet design
• Unique impact-resistant heating element
• 3-position rocker switch: off, high and low
• Support stand enables heat gun to be station-
ary for workbench or assembly work
• For use by plumbers, painters, floor covering installers,
technicians, boat builders, food processing, industry
mechanics, contractors, body shops, photographers,
schools, laboratories
• Dual temperature: 570°F and 1000°F; rotate rear housing
to select temperature ranges, 140°F to 1040°F
• 120V (AC only)
Air Volume
Order No. Mfg. No. Cu. Ft. Min. Amps
5029.00965 8975-6 14.8 11.6
ELECTRIC POWER TOOLS
50
733
Comments to this Manuals