Delta 50-775 Instruction Manual

INSTRUCTION MANUALOne H.P. Single-StageDust Collector(Model 50-775)PART NO. 902116 (015)Copyright © 2001 Delta MachineryTo learn more about DELTA MACH

10Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire extension cord whichhas a 3-prong grounding type plug

11ACCESSORIESA complete line of accessories is available from your Delta Supplier, Porter-Cable · Delta Factory Service Centers, andDelta Authorized S

12NOTES

2GENERAL SAFETY RULESWoodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain ha

3IMPORTANT SAFETY RULES FORDUST COLLECTORSWARNING:Basic precautionsshould always be followed when using your dustcollector. To reduce the risk of inju

4Fig. 2UNPACKING AND CLEANINGCarefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from allunpai

5ASSEMBLYASSEMBLING WHEELCASTERS 1. Remove the hex nut and lockwasher from each ofthe four wheel casters.2. Place the dust collector on its side.2. In

6ATTACHING MOTOR ANDBLOWER ASSEMBLY TOFRAME1. Place motor assembly and base assembly on theirside.2. Align the four holes, two shown at (C), on the to

7Fig. 14ASSEMBLING FILTERAND DUST COLLECTIONBAGS TO DRUM1. Thread a 5/16" hex nut (A) Fig. 13, onto the end ofbag support rod (B). Thread rod int

8ASSEMBLING DUST INTAKEHOSE TO MOTOR ANDBLOWER ASSEMBLYThe dust collector is supplied with a 4" flexible dustintake hose. Place the intake cap ho

9Fig. 19Fig. 20GROUNDED OUTLET BOXCURRENTCARRYINGPRONGSGROUNDING BLADEIS LONGEST OF THE 3 BLADESGROUNDED OUTLET BOXGROUNDING MEANSADAPTERFig. 21120 VO