INSTRUCTION MANUAL1½ H.P. Single-StageDust Collector(Model 50-850)PART NO. 902115 - 11-15-02Copyright © 2002 Delta MachineryESPAÑOL: PÁGINA 15To learn
10Use proper extension cords. Make sure your extensioncord is in good condition and is a 3-wire extension cordwhich has a 3-prong grounding type plug
11OPERATING CONTROLSWARNING: BEFORE OPERATING THE MACHINE, FOR OPERATOR SAFETY, ALWAYS MAKE CERTAIN THATEACH DUST INTAKE PORT (WHICH IS NOT BEING USED
12Two Year Limited WarrantyDelta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which
The following are trademarks of PORTER-CABLE·DELTA (Las siguientes son marcas registradas de PORTER-CABLE S.A.): Auto-Set®,BAMMER®, B.O.S.S.®, Builder
2GENERAL SAFETY RULESWoodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain ha
3ADDITIONAL SAFETY RULES FORDUST COLLECTORSWARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.1. DO NOT OPERATE THIS MACHINE
4UNPACKING AND CLEANINGCarefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from allunpainted
5ASSEMBLYFig. 4Fig. 5Fig. 6Fig. 8Fig. 7ASSEMBLINGCASTERS TO BASE1. Insert threaded rod of caster (A) Fig. 4, into the holelocated on the underside of
6Fig. 9Fig. 10Fig. 13Fig. 124. Assemble the remaining drum supports (F) Fig. 9, tobase (A) as shown.5. Assemble “U” bracket (H) Fig. 10, to drum (J).
7Fig. 15Fig. 16Fig. 179. Attach the lower dust bag retaining clip (A) Fig. 14A,to the dust collector drum. Align the two holes (B) in theretaining cli
8Fig. 18Fig. 19Fig. 22Fig. 20Fig. 21ASSEMBLING FILTER ANDDUST COLLECTION BAGSTO DRUM1. Hook the loop on the top of filter bag (A) Fig. 18,onto filter
9Fig. 23ASSEMBLING DUST INTAKEHOSES TO BLOWER ANDMOTOR ASSEMBLYKEEP DUST CAPS INSTALLED AT ALL TIMES OVERINTAKE PORTS. REMOVE A DUST CAP ONLY WHENA FL
Comments to this Manuals