Delta 50-850 Instruction Manual download pdf (Page 11)

11 - English

ASSEMBLING FILTER AND DUST

COLLECTION BAGS TO DRUM

Disconnect the machine from the

power source!

1. Hook the loop on the top of filter bag (A) Fig. 17,

onto filter bag support rod (B) as shown.

2. Assemble extension rod (C) Fig. 18, onto the end

of filter bag support rod (B). Raise support rods (B)

and (C), with filter bag (A) attached and place end

of support rod (C) into holes of bracket (D). NOTE:

Flared end of filter bag extension rod will prevent the

rod from sliding through bracket.

3. Position open end of filter bag (A) Fig. 18, over lip of

dust drum (E). Insert locking band (F) Fig. 19, through

the loops of filter bag (A) and fasten with clamp (G)

as shown in Fig. 20. NOTE: Make certain locking

band is positioned in the channel of drum (F) before

fastening clamp.

4. Pull up on each retaining clip (A) Fig. 21, and insert

the dust collection bag (B) underneath each retaining

clip to hold the dust collection bag in place.

5. Place the locking clamp (C) Fig. 21 around dust

collection bag and dust collector drum and lock in

place.

NOTE: Make certain locking clamp is positioned in the

channel of the dust collector drum before locking clamp.

Fig. 17

Fig. 19

Fig. 21

Fig. 20

Fig. 18

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

No comments

Delta 50-850 Instruction Manual Page 11