Delta AP400 Instruction Manual download pdf (Page 4)

1. FOR YOUR OWN SAFETY, READ THE INSTRUCTION

MANUAL BEFORE OPERATING THE MACHINE.

Learning the machine’s application, limitations, and

specific hazards will greatly minimize the possibility

of accidents and injury.

2. WEAR EYE AND HEARING PROTECTION. ALWAYS

USE SAFETY GLASSES. Everyday eyeglasses are NOT

safety glasses. USE CERTIFIED SAFETY EQUIPMENT.

Eye protection equipment should comply with ANSI

Z87.1 standards. Hearing equipment should comply

with ANSI S3.19 standards.

3. WEAR PROPER APPAREL. Do not wear loose

clothing, gloves, neckties, rings, bracelets, or other

jewelry which may get caught in moving parts. Nonslip

protective footwear is recommended. Wear protective

hair covering to contain long hair.

4. DO NOT USE THE MACHINE IN A DANGEROUS

ENVIRONMENT. The use of power tools in damp or wet

locations or in rain can cause shock or electrocution.

Keep your work area well-lit to prevent tripping or

placing arms, hands, and fingers in danger.

5. MAINTAIN ALL TOOLS AND MACHINES IN PEAK

CONDITION. Keep tools sharp and clean for best and

safest performance. Follow instructions for lubricating

and changing accessories. Poorly maintained tools and

machines can further damage the tool or machine and/or

cause injury.

6. CHECK FOR DAMAGED PARTS. Before using the

machine, check for any damaged parts. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, and any other conditions that may

affect its operation. A guard or any other part that is

damaged should be properly repaired or replaced

with Delta or factory authorized replacement parts.

Damaged parts can cause further damage to the

machine and/or injury.

7. KEEP THE WORK AREA CLEAN. Cluttered areas and

benches invite accidents.

8. KEEP CHILDREN AND VISITORS AWAY. Your shop is

a potentially dangerous environment. Children and visitors

can be injured.

9. REDUCE THE RISK OF UNINTENTIONAL STARTING.

Make sure that the switch is in the “OFF” position

before plugging in the power cord. In the event of a

power failure, move the switch to the “OFF” position.

An accidental start-up can cause injury. Do not touch

the plug’s metal prongs when unplugging or plugging in

the cord.

10. USE THE GUARDS. Check to see that all guards are in

place, secured, and working correctly to prevent injury.

11. REMOVE ADJUSTING KEYS AND WRENCHES

BEFORE STARTING THE MACHINE. Tools, scrap

pieces, and other debris can be thrown at high speed,

causing injury.

12. USE THE RIGHT MACHINE. Don’t force a machine or

an attachment to do a job for which it was not designed.

Damage to the machine and/or injury may result.

13. USE RECOMMENDED ACCESSORIES. The use of

accessories and attachments not recommended by

Delta may cause damage to the machine or injury to the

user.

14. USE THE PROPER EXTENSION CORD. Make sure

your extension cord is in good condition. When using

an extension cord, be sure to use one heavy enough to

carry the current your product will draw. An undersized

cord will cause a drop in line voltage, resulting in loss

of power and overheating. See the Extension Cord

Chart for the correct size depending on the cord length

and nameplate ampere rating. If in doubt, use the next

heavier gauge. The smaller the gauge number, the

heavier the cord.

15. SECURE THE WORKPIECE. Use clamps or a vise to

hold the workpiece when practical. Loss of control of a

workpiece can cause injury.

16. FEED THE WORKPIECE AGAINST THE DIRECTION

OF THE ROTATION OF THE BLADE, CUTTER, OR

ABRASIVE SURFACE. Feeding it from the other

direction will cause the workpiece to be thrown out at

high speed.

17. DON’T FORCE THE WORKPIECE ON THE MACHINE.

Damage to the machine and/or injury may result.

18. DON’T OVERREACH. Loss of balance can make you

fall into a working machine, causing injury.

19. NEVER STAND ON THE MACHINE. Injury could occur if

the tool tips, or if you accidentally contact the cutting tool.

20. NEVER LEAVE THE MACHINE RUNNING

UNATTENDED. TURN THE POWER OFF. Don’t leave the

machine until it comes to a complete stop. A child or visitor

could be injured.

21. TURN THE MACHINE “OFF”, AND DISCONNECT

THE MACHINE FROM THE POWER SOURCE before

installing or removing accessories, changing cutters,

adjusting or changing set-ups. When making repairs, be

sure to lock the start switch in the “OFF” position. An

accidental start-up can cause injury.

22. MAKE YOUR WORKSHOP CHILDPROOF WITH

PADLOCKS, MASTER SWITCHES, OR BY

REMOVING STARTER KEYS. The accidental start-up

of a machine by a child or visitor could cause injury.

23. STAY ALERT, WATCH WHAT YOU ARE DOING,

AND USE COMMON SENSE. DO NOT USE THE

MACHINE WHEN YOU ARE TIRED OR UNDER

THE INFLUENCE OF DRUGS, ALCOHOL, OR

MEDICATION. A moment of inattention while operating

power tools may result in injury.

24. USE OF THIS TOOL CAN

GENERATE AND DISBURSE DUST OR OTHER

AIRBORNE PARTICLES, INCLUDING WOOD DUST,

CRYSTALLINE SILICA DUST AND ASBESTOS DUST.

Direct particles away from face and body. Always

operate tool in well ventilated area and provide for

proper dust removal. Use dust collection system

wherever possible. Exposure to the dust may cause

serious and permanent respiratory or other injury,

including silicosis (a serious lung disease), cancer, and

death. Avoid breathing the dust, and avoid prolonged

contact with dust. Allowing dust to get into your mouth

or eyes, or lay on your skin may promote absorption

of harmful material. Always use properly fitting NIOSH/

OSHA approved respiratory protection appropriate for

the dust exposure, and wash exposed areas with soap

and water.

GENERAL SAFETY RULES

Failure to follow these rules may result in serious personal injury.

1 2 3 4 5 6 7 8 9 ... 39 40

Comments to this Manuals

No comments

Delta AP400 Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for Dust covers Delta AP400