Delta GR275 Instruction Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
9
If the machine has a tendency to tip over, slide, or "walk",
secure the machine to the supporting surface. Two holes
(A) Fig. 7 are provided.
Your grinder is supplied with two eye shields.
Always wear eye protection.
1. Place the eye shield (A) on the spark guard (Fig. 4).
2. Align the holes in the eye shield with the holes in the
spark guard. Place the eye shield spacer (A) Fig. 5 in
the space in the spark guard.
3. Insert the eye shield bolt (A) Fig. 6 through the hole
in the eye shield (B), the eye-shield spacer (C), and
the spark guard (D).
4. Place a 1/4" (Smaller OD) flat washer (E) Fig. 6 on
the end of the eye-shield bolt. Fasten the eye-shield
knob (F) on the end of the eye-shield bolt.
5. Attach the other eye-shield.
A
A
A
D
E
F
C
B
A
Fig. 4
Fig. 5
Fig. 6
Fig. 7
FASTENING THE GRINDER TO THE SUPPORTING SURFACE
EYE SHIELDS
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Comments to this Manuals

No comments