Delta 22-470 User Manual download pdf (Page 12)

FEED ROLLER SPEEDS

Your planer is equipped with feed roller speeds of 20

and 30 feet per minute depending on belt placement on

the pulleys. As a rule, a faster feed rate is used for gen-

eral planing operations, while a slower feed rate

(because it provides more cuts per inch of stock) gives a

finer and smoother finish to the workpiece.

1. To engage the feed rollers, simultaneously push but-

ton (A) Fig. 16, and pull downward on handle (B).

2. To disengage the feed rollers, simultaneously push

button (A) Fig. 17, and move handle (B) to the raised

position, as shown.

3. To change feed roller speeds, disengage the feed

rollers as explained in STEP 2.

4. DISCONNECT THE MACHINE FROM

THE POWER SOURCE.

5. Open two doors (C) and (D) Fig. 18, located on the

left side of the machine.

Fig. 16

Fig. 17

Fig. 18

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Delta 22-470 User Manual Page 12