Delta 36-L51L User Manual Page 15
- Page / 76
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
15
If the motor continually shuts off due to overloading, contact a qualified electrician.
In the event of a power outage (breaker or fuse trip), always move the switch to the “OFF” position
until the main power is restored.
RAISING AND LOWERING THE BLADE
Raise or lower the blade with the front handwheel (A) Fig.
34. With the exception of hollow ground blades, raise the
blade 1/8" to 1/4" above the top surface of the workpiece.
With hollow-ground blades, raise the blade to the maximum
height to provide greater clearance. To raise the saw blade,
loosen lock knob (B) Fig. 34, and turn the handwheel (A),
clockwise. To lower the saw blade, turn handwheel (A)
counter-clockwise.
Lock the sawblade by turning the lock knob (B) Fig. 34
clockwise. Only a small amount of force is required to lock
the blade raising mechanism securely. Any added force
merely puts unnecessary strain on the locking device.
Limiting stops for raising or lowering are permanently built
into the mechanism and need no further adjustment.
ADJUSTING 90
° AND 45° POSITIVE STOPS
Your saw is supplied with overload protection. If the motor shuts off or fails to start due to overloading (cutting stock too
fast, using a dull blade, using the saw beyond its capacity, etc.) or low voltage, let the motor cool three to five minutes.
The overload will automatically reset itself and the machine can then be started again by pressing the “ON” button.
OVERLOAD PROTECTION
Fig. 34
TILTING THE BLADE
The blade tilting mechanism allows the blade to be tilted up to 45
° to the right.
To tilt the saw blade, loosen the lock knob (D) Fig. 34 and turn handwheel (C). A pointer indicates the angle of tilt on scale (E),
marked in one-degree increments. To lock the saw blade, tighten the lock knob (D).
Disconnect the machine from the power source!
Lock the blade in position before starting the saw.
Lock the blade in position before starting the saw.
1. Raise the saw blade all the way. Turn the blade-tilting handwheel clockwise as far as it will go.
2. Use a square to see if the blade is 90
° to the table (Fig. 35). To adjust, turn the blade-tilting handwheel counter-clockwise.
Loosen the locknut (A) Fig. 36, and tighten or loosen the adjusting screw (B) until the head of the screw (B) contacts the
casting on the front trunnion when the blade is at 90
° to the table. Tight en the locknut (A).
Fig. 35
Fig. 36
C
D
EA
B
B
A
- UNISAW sierra 1
- TABLE OF CONTENTS 2
- IMPORTANT SAFETY INSTRUCTIONS 2
- CALIFORNIA PROPOSITION 65 3
- GENERAL SAFETY RULES 4
- SAVE THESE INSTRUCTIONS 5
- POWER CONNECTIONS 6
- GROUNDING INSTRUCTIONS 6
- CARTON CONTENTS 7
- ASSEMBLY 8
- Fig. 3 Fig. 4 9
- Fig. 12 Fig. 13 11
- Fig. 24 Fig. 25 13
- OPERATION 14
- Fig. 39 Fig. 40 16
- MACHINE USE 18
- Fig. 51 19
- Fig. 48 19
- Fig. 49 19
- Fig. 50 19
- Fig. 52 20
- Fig. 53 Fig. 54 20
- Fig. 65 Fig. 66 23
- TROUBLESHOOTING 25
- MAINTENANCE 25
- ACCESSORIES 25
- WARRANTY 26
- FRANÇAIS 27
- RÈGLES DE SÉCURITÉ GÉNÉRALES 29
- CONSERVER CES DIRECTIVES 30
- CONTENUS DE BOITE 32
- FUNCTIONAL DESCRIPTION 32
- ASSEMBLAGE 33
- RALLONGES 34
- COUVERCLE DU MOTEUR 38
- FONCTIONNEMENT 39
- AJUSTEMENT DE LA TABLE 41
- CHANGEMENT DE LA LAME 42
- UTILISATION DE LA MACHINE 43
- DEPANNAGE 49
- ENTRETIEN 50
- ACCESSOIRIES 50
- GARANTIE 50
- PROPOSICIÓN DE CALIFORNIA 65 52
- NORMAS GENERALES DE SEGURIDAD 53
- MOTOR SPECIFICATIONS 55
- DESCRIPCIÓN FUNCIONAL 56
- CONTENIDO DE CARTON 56
- ENSAMBLAJE 57
- BASES DE EXTENSIÓN 58
- UTILIZAR LA MAQUINA 67
- Fig. 54 69
- MADERA”, y el uso 70
- MANTENIMIENTO 74
- LOCALIZACION DE FALLAS 74
- SERVICIO 74
- GARANTIA 75
- ACCESORIOS 75
- Delta Machinery 76
- 4825 Highway 45 North 76
- Jackson, TN 38305 76
- (800) 223-7278 76
Related products and manuals for Equipment Delta 36-L51L
Equipment Delta 31-260X User Manual
(60 pages)
(60 pages)
Equipment Delta 43-460 User Manual
(16 pages)
(16 pages)
Equipment Delta JT360 User Manual
(76 pages)
(76 pages)
Equipment Delta 78-960 User Manual
(12 pages)
(12 pages)
Equipment Delta A18657 User Manual
(54 pages)
(54 pages)
© 2020, manymanuals.com. All rights reserved. | 1.320 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals