Delta A18657 User Manual download pdf (Page 16)

16 - English

MAINTENANCE

REPLACING KNIVES

The knives supplied with your planer are double edged and reversible so that you can turn the knives end-for-end when

one edge becomes dull or chipped. To change the knives:

Disconnect machine from power source!

1. Remove the two top covers (C) Fig. 28.

Fig. 28

2. Raise the head assembly (B) to 4" (102 mm) on the

“Scale and Pointer”.

3. Remove the two screws (A) Fig. 28. Pull the

cutterhead guard (B) straight out.

The knives are sharp. Be careful when

removing, handling, or installing knives.

4. Pull the guard down (G) Fig. 29 to gain access to the

hex hole in the end of the cutterhead.

5. Insert the supplied wrench into the hex hole (A)

Fig. 29

Fig. 29. Rotate the cutterhead until the cutterhead

lock engages.

6. Use the wrench (E) Fig. 30 to loosen the seven

Fig. 30

screws (F) enough to allow the locking bar (D) to

separate from the knife.

7. Place the magnetized knife transfer tool (G) Fig. 31

Fig. 31

under the center of the knife. Lift the knife transfer

tool until the knife (H) separates from the pins.

Remove the knife.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

No comments

Delta A18657 User Manual Page 16