Delta DF59218SN Installation Guide Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
ADVERTENCIAS DE SEGURIDAD:
NO instale este equipo sin antes leer y entender esta hoja de instrucciones. Si usted no logra entender estas advertencias e instrucciones, contacte a
un profesional de la salud, vendedor o personal técnico para asistencia antes de intentar instalar este equipo - de otra forma, podría incurrir en
lesiones.
• Luego de CUALESQUIERA ajustes, reparaciones o servicios y ANTES de usar, asegúrese de que todos los accesorios de acoplamiento estén
apretados firmemente.
• Las Barras de asistencia decorativas aumentan la seguridad en áreas de baño e inodoros si se acoplan como se instruye. La ubicación, el tamaño y
el ángulo de las barras deben ser determinados por un profesional calificado para proveer óptima seguridad y funcionalidad.
• Tome precauciones EXTREMAS en tinas o pisos mojados.
• Los usuarios con capacidades físicas limitadas deben ser supervisados o ayudados en las áreas de tinas, duchas e inodoros, aun cuando estén
usando Barras de asistencia decorativas.
• Esta Barras de asistencia decorativas puede proveer apoyo y mayor estabilidad para un individuo que pese hasta 300 libras (136 kg). Las Barras de
asistencia decorativas NO están diseñadas para apoyar todo el peso de un individuo. Use la Barras de asistencia decorativas ÚNICAMENTE.
• Asegúrese que las Barras de asistencia decorativas estén correcta y firmemente instaladas. NUNCA use las Barras de asistencia decorativas si nota
que están flojas.
ADVERTENCIA: productos de hierro. Sólo para uso decorativo en interiores. No utilice este producto al aire libre o en un ambiente muy húmedo ya
que se oxidará.
HERRAMIENTAS REQUERIDAS:
Taladro eléctrico de 0,95 cm (3/8")
• Broca de 0,28 cm (7/64") (para taladrar el agujero guía para la instalación del tornillo para madera en el montante de madera)
• Broca con punta de carburo de 0,64 cm (1/4") (si taladra a través de baldosa de cerámica)
• Desatornillador en cruz (Phillips) #2
• Gafas de seguridad
• Detector de vigas
PARTE SUMINISTRADA:
• Seis (6) tornillos para madera #10 x 6,35 cm (2-1/2")
IMPORTANTE:
El método de montaje recomendado para las Barras de asistencia decorativas es instalar AMBOS extremos de la barra en los montantes de
MADERA de la pared.
ANTES DE INSTALAR LA BARRAS DE ASISTENCIA DECORATIVAS:
1. Saque la Barras de asistencia decorativas y las piezas del paquete.
2. Determine dónde quiere instalar la Barras de asistencia decorativas.
3. Coloque la Barras de asistencia decorativas en la posición deseada. Si la instala de manera horizontal o vertical, revise que la Barras de asistencia
decorativas esté nivelada.
4. Con un lápiz marque los centros de las posiciones de agujeros de montaje de un extremo (vea la Figura 1). Estos son los puntos donde usted
taladrará después los agujeros guía para colocar los tornillos. Si instala sobre baldosas de cerámica, coloque cinta adhesiva de papel en las áreas
de montaje antes de marcar las ubicaciones de los agujeros para evitar que la broca de punta de carburo se deslice a través de la baldosa.
5. Repita el paso 4 para el otro extremo de la Barras de asistencia decorativas.
5
PARA RECOMENDACIONES EN LA COLOCACIÓN DE BARRAS DE ASISTENCIA DECORATIVAS,
POR FAVOR VISITE NUESTRO SITIO WEB EN WWW.LIBERTYHARDWARE.COM
2
THE FOLLOWING STEPS REQUIRE DRILLING INTO THE WALL.
When drilling into the wall, exercise care to avoid any electrical wiring or
plumbing that may be located behind the wall. Damaged electrical wiring can
cause electrical shock and/or fire. Since older homes do not always fall in line
with current housing codes and requirements, know where internal wall wiring
is located so that no wires will interfere with your installation.
PROPER INSTALLATION IS EXTREMELY IMPORTANT. IF IN DOUBT,
INSTALLATION SHOULD BE DONE BY A QUALIFIED PROFESSIONAL.
TO INSTALL INTO WOOD WALL STUDS:
1. Put on safety glasses before starting.
2. Use the 3/8-inch power drill and 7/64-inch drill bit to drill all holes into the wall and
wood wall studs at the marked positions. NOTE: If installing Decorative Assist Bar
over ceramic tiles, the 1/4-inch carbide tip drill bit will be needed for drilling through the
tile, in order to prevent damage to the tiles. Drill pilot holes through the ceramic tiles
by using a 1/4-inch carbide tip drill bit. Once a hole has been drilled through the tile,
use the 7/64-inch drill bit to drill a pilot hole in the wood wall stud itself.
3. Place the Decorative Assist Bar on the wall, aligning mounting holes with the holes
in the wall.
4. Insert the wood screws provided into one end of the Decorative Assist Bar. Screw
into wall and wall stud (HAND TIGHTEN ONLY) (see Figure 3).
5. Repeat Step 4 for opposite end of the Decorative Assist Bar.
6. Securely tighten all mounting wood screws with a screwdriver.
USING RESIDENTIAL ASSIST BAR:
1. Read, understand and follow the information in the SAFETY WARNINGS
section of this instruction booklet. Liberty Hardware Manufacturing Corporation
shall have no liability for any damage or injury caused by improper installation or
use of this Decorative Assist Bar.
2. Grasp the Decorative Assist Bar when exiting or entering the bathtub or when
sitting down or rising from the commode.
3. Use EXTREME caution on wet tub or floor surfaces.
4. DO NOT put entire weight on Decorative Assist Bar. Decorative Assist Bar is
rated for persons weighing up to 300 pounds when properly installed.
5. DO NOT stand, sit or step on Decorative Assist Bar. DO NOT use Decorative
Assist Bar as a step or platform to reach area above the tub. Use the bar for
assistance ONLY.
CARE AND MAINTENANCE:
1. Use of mild soap and water or a non-abrasive cleaner is recommended
for cleaning.
2. Periodically inspect the Decorative Assist Bar for damage or looseness.
DO NOT use if any damage or looseness exists. Contact your authorized
dealer for assistance.
3. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DECORATIVE ASSIST BAR MAY NOT
PROVIDE DESIGNED AMOUNT OF
SUPPORT UNLESS THESE
INSTALLATION INSTRUCTIONS ARE
STRICTLY FOLLOWED.
For proper installation, both ends of
Decorative Assist Bar MUST be positioned
over a wall stud. For solid support, at least
two (2) of the three (3) screws on the end of
the Decorative Assist Bar MUST go through
the wallboard or tile and be tightly secured
into the wall stud. Given standard stud
sizes, only two (2) of the three (3) screws
may screw into the wall stud.
Decorative Assist Bar may be installed
vertically, horizontally or at an angle, so
long as at least two (2) of the three (3)
mounting screws on both ends of the
Decorative Assist Bar are secured into a
wall stud (see Figure 2). Locate the wall
studs behind the wall before beginning
installation (a stud finder can be obtained
from a hardware store).
BOTH ends of decorative assist bar into WOOD wall studs
Figure 2
FRONT VIEW
HORIZONTAL MOUNT
WOOD
WALL
STUD
FRONT VIEW
VERTICAL MOUNT
FRONT VIEW
ANGLE MOUNT
WOOD
WALL
STUD
WOOD
WALL
STUD
WOOD
WALL
STUD
NORMALLY
16" CENTER-TO-CENTER
Figure 3
SIDE VIEW VERTICAL MOUNT
WALLBOARD
WOOD
WALL
STUD
WOOD SCREW
RESIDENTIAL
ASSIST BAR
WOOD
WALL STUD
WOOD
WALL STUD
WALLBOARD
RESIDENTIAL
ASSIST BAR
TOP
WOOD
SCREW
BOTTOM
WOOD SCREW
LOCATED BELOW
TOP WOOD SCREW
IN WALL STUD
TOP VIEW
HORIZONTAL MOUNT
NORMALLY
16" CENTER-TO-CENTER
INSTRUCCIONES DE INSTALACIÓN, OPERACIÓN Y CUIDADO
Figura 1
AGUJEROS
DE MONTAJE
Barras de asistencia decorativas • Uso ligero
TORNILLO PARA MADERA (6)
Page view 3
1 2 3 4

Comments to this Manuals

No comments