Delta 31-552 User Manual download pdf (Page 5)

Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire extension cord which

has a 3-prong grounding type plug and matching receptacle which will accept the machine’s plug. When using an

extension cord, be sure to use one heavy enough to carry the current of the machine. An undersized cord will cause

a drop in line voltage, resulting in loss of power and overheating. Fig. D, shows the correct gauge to use depending

on the cord length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

EXTENSION CORDS

OPERATING INSTRUCTIONS

FOREWORD

The Delta 6" Abrasive Belt Finishing Machine provides fine finishes fast. The 6" abrasive belt operates vertically,

horizontally or any angle in between. The support table on the 6" Abrasive Belt Finishing Machine tilts 45° out and 20°

in for bevel operations.

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from

all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,

gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household

floor paste wax.

Fig. D

MINIMUM GAUGE EXTENSION CORD

RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES

Ampere Total Length Gauge of

Rating Volts of Cord in Feet Extension Cord

0-6 115

up to

25 18 AWG

0-6 115 25-50 16 AWG

0-6 115 50-100 16 AWG

0-6 115 100-150 14 AWG

6-10 115

up to

25 18 AWG

6-10 115 25-50 16 AWG

6-10 115 50-100 14 AWG

6-10 115 100-150 12 AWG

10-12 115

up to

25 16 AWG

10-12 115 25-50 16 AWG

10-12 115 50-100 14 AWG

10-12 115 100-150 12 AWG

12-16 115

up to

25 14 AWG

12-16 115 25-50 12 AWG

12-16 115

GREATER THAN 50 FEET NOT RECOMMENDED

MINIMUM GAUGE EXTENSION CORD

RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES

Ampere Total Length Gauge of

Rating Volts of Cord in Feet Extension Cord

0-6 230

up to

50 18 AWG

0-6 230 50-100 16 AWG

0-6 230 100-200 16 AWG

0-6 230 200-300 14 AWG

6-10 230

up to

50 18 AWG

6-10 230 50-100 16 AWG

6-10 230 100-200 14 AWG

6-10 230 200-300 12 AWG

10-12 230

up to

50 16 AWG

10-12 230 50-100 16 AWG

10-12 230 100-200 14 AWG

10-12 230 200-300 12 AWG

12-16 230

up to

50 14 AWG

12-16 230 50-100 12 AWG

12-16 230

GREATER THAN 100 FEET NOT RECOMMENDED

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Delta 31-552 User Manual Page 5

Comments to this Manuals

Related products and manuals for Grinding machines Delta 31-552