Delta (Model 31-695) User Manual download pdf (Page 6)

EXTENSION CORDS

Use proper extension cords. Make sure

your extension cord is in good condition

and is a 3-wire extension cord which has

a 3-prong grounding type plug and

matching receptacle which will accept

the machine’s plug. When using an

extension cord, be sure to use one heavy

enough to carry the current of the

machine. An undersized cord will cause

a drop in line voltage, resulting in loss of

power and overheating. Fig. D-1 shows

the correct gauge to use depending on

the cord length. If in doubt, use the next

heavier gauge. The smaller the gauge

number, the heavier the cord.

Fig. D-1

MINIMUM GAUGE EXTENSION CORD

RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES

Ampere Total Length Gauge of

Rating Volts of Cord in Feet Extension Cord

0-6 120

up to

25 18 AWG

0-6 120 25-50 16 AWG

0-6 120 50-100 16 AWG

0-6 120 100-150 14 AWG

6-10 120

up to

25 18 AWG

6-10 120 25-50 16 AWG

6-10 120 50-100 14 AWG

6-10 120 100-150 12 AWG

10-12 120

up to

25 16 AWG

10-12 120 25-50 16 AWG

10-12 120 50-100 14 AWG

10-12 120 100-150 12 AWG

12-16 120

up to

25 14 AWG

12-16 120 25-50 12 AWG

12-16 120

GREATER THAN 50 FEET NOT RECOMMENDED

FOREWORD

FUNCTIONAL DESCRIPTION

The Delta Model 31-695 features a large 9" diameter abrasive disc that is perfect for sanding large curves or rounding

out sharp corners. The Delta Model 31-695 also features an adjustable 6" belt unit that can be operated vertically or

horizontally or at any angle in between.

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from

all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,

gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household

floor paste wax.

The photograph on the manual cover illustrates the current production model. All other illustrations

contained in the manual are representative only and may no depict the actual color, labeling, or

accessories, and are intended to illustrate technique only.

NOTICE:

CARTON CONTENTS

Your new Belt/Disc Sander and Stand is shipped complete in one container. Carefully unpack the sander, stand, and

all loose items from the shipping container.

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

Comments to this Manuals

No comments

Delta (Model 31-695) User Manual Page 6

Comments to this Manuals

Related products and manuals for Grinding machines Delta (Model 31-695)