Delta Mynah PLC-5 User Manual download pdf (Page 7)

Powerful Solutions for Digital Plants

MYNAH Technologies  504 Trade Center Blvd.  Chesterfield, MO 63005  Telephone 636 681-1555  Fax 636 681-1660

www.mynah.com

3 Downloading the firmware

To begin installation of the Allen-Bradley driver, create a folder on the hard drive. The

preferred location for the folder is at C:\DeltaV\Ctl\ProgSerial\AllenBradley, although any

location will work.

Next, copy the eight files from the diskette provided. Those files are:

1200.idf

IO_Compatibility.csv

AllenBradleyApp.sdf

AllenBradleyApp.hex

SerBoot.hex

SerReleaseApp.hex

StandardModbusApp.sdf

Ab-manual.pdf

Once the files have been copied to the appropriate folder, the process of downloading the

driver can begin:

1. Start the “Controller Upgrade Utility” from the DeltaV/Installation menu

2. Select “Upgrade I/O Modules” and engage the “Next” button

3. From the controller list select the controller to which the serial card is attached and

enter the “Next” button

4. Find the list of I/O cards connected to the selected controller. At the bottom of the

screen there is an upgrade file path displayed. Enter the “Browse” button and browse

to the directory containing the Allen-Bradley driver. This should be

C:\DeltaV\Ctl\ProgSerial\AllenBradley. Engage the “OK” button to return to the I/O card

selection screen

5. Select the Serial Card or Prog Serial Card to be upgraded

6. If the user chooses a standard Serial Card to be upgraded then the card will

automatically be upgraded as soon as the “Next” button is entered. If the user chooses

a Prog Serial Card, the user will be prompted for the SDF file to use. Browse to and

select the proper SDF file. Press the “Open” button followed the “Next” button to start

the upgrade process

7. The Flash Upgrade process should start and the progress will be displayed in the

progress window. An upgrade complete message will be displayed upon completion of

the upgrade.

8. If a standard Serial Card was used for this installation, delete the Serial Card in DeltaV

Explorer and Auto-sense the new Prog Serial Card. Installing a special driver changes

the card from a standard Serial Card to a Prog Serial Card.

1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

No comments

Delta Mynah PLC-5 User Manual Page 7