Delta PROFIBUS-DP Module for VFD Series Drives PD-01 User Manual download pdf (Page 10)

PD-01 PROFIBUS-DP Module

Chapter 3 Installation

IMPORTANT NOTE:

Prior to the installation or remove the PD-01 from network, make sure the power of VFD

series Drives is switched off (not-energized).

Installing the PD-01

Improper installation of the PD-01 will cost its life usage. Please follow the instructions to

install your PD-01 carefully.

 DIN Rail Installation

PD-01 can be secured by mounting to DIN rail. There is a small retaining clip locates at

the bottom of PD-01, place the PD-01 onto the DIN rail and gently push up on the clip to

ensure the PD-01 is mounted to the DIN rail.

 Direct Mounting

Please use the specified M4 screws to install the PD-01. Also please ensure to tighten

them properly.

Screw

Mounting

Hole

DIN RAIL

CLIP

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

No comments

Delta PROFIBUS-DP Module for VFD Series Drives PD-01 User Manual Page 10