Delta PROFIBUS-DP Module for VFD Series Drives PD-01 User Manual download pdf (Page 29)

PD-01 PROFIBUS-DP Module

DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED

26

Item Name Type Description Default

3 Data Input 3 UINT

This is a MODBUS address. The 3rd word in

PZD of cyclic output data will be sent to this

address if select Module = "4 PKW, 4 PZD".

0x0000

4 Data Input 4 UINT

This is a MODBUS address. The 4th word in

PZD of cyclic output data will be sent to this

address if select Module = "4 PKW, 4 PZD".

0x0000

5 Data Output 1 UINT

This is a MODBUS address. PD-01 will

monitor this address, and copy the return

data to the 1st word in PZD of cyclic input

data.

0x2101

6 Data Output 2 UINT

This is a MODBUS address. PD-01 will

monitor this address, and copy the return

data to the 2nd word in PZD of cyclic input

data.

0x2102

7 Data Output 3 UINT

This is a MODBUS address. PD-01 will

monitor this address, and copy the return

data to the 3rd word in PZD of cyclic input

data if select Module = "4 PKW, 4 PZD".

0x2103

8 Data Output 4 UINT

This is a MODBUS address. PD-01 will

monitor this address, and copy the return

data to the 4th word in PZD of cyclic input

data if select Module = "4 PKW, 4 PZD".

0x2104

9 d_state UINT

This is a flag. If address in Data Output 1 ~

Data Output 4 is continuous, set it to 1, and

set the others to 0.

0x0001

10 din_len UINT

This is a length, and unit is word. It specifies

the length of PD-01 to process data in PZD, if

user select the Module = "4 PKW, 4 PZD", but

din_len is 3, PD-01 will process 3 word and

ignore the 4th word.

0x0002

11 dout_len UINT

This is a length, and unit is word. It specifies

the length of PD-01 to monitor data from AC

Drive, if user select Module = "4 PKW, 4

PZD", but dout_len is 3, PD-01 will monitor 3

word and ignore the 4th address.

0x0002

12 LossDPComTreat UINT

This variable indicates that the PD-01 will

take action when communication with

Profibus network is lost, the value can be

assigned as follows:

00 – Ignore event and continue;

01 – Stop according to Pr “Stop Method” in

VFD series Drives.

0x0001

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments