Delta D27665 Instruction Manual download pdf (Page 7)

7- ENG

D27665

HOW TO USE THE CHEMICAL

APPLICATION UNIT

NOTE: Use only soaps and

chemicals designed for pressure

washer use. Do not use bleach.

1. Place the ON-OFF switch in the

OFF position.

2. Turn off the water supply.

3. Remove chemical application unit

from holder.

4. Fill the tank of the chemical

application unit with detergent.

5. With wand removed attach

chemical application unit to gun as

shown.

6. See Before Starting and Starting

Your Pressure Washer paragraphs

in this section to continue.

Figure 2

HOW TO USE THE HIGH

PRESSURE SPRAY WAND

The nozzle at the end of the wand can

be rotated to change from narrow jet

stream to fan jet, as shown.

For low pressure operation, pull the

nozzle at the end of the wand out as

shown.

For high pressure operation, push the

nozzle at the end of the wand in as

shown.

Glossary

Ground Fault Circuit Interrupter

Protection (GFCI): This washer is

provided with a ground fault circuit

interrupter (GFCI) built into the plug of

the power supply cord. This device

provides additional protection from the

risk of electric shock. Should

replacement of the plug or cord

become necessary, use only identical

replacement parts that include GFCI

protection.

Total Stop System: This unit is

equipped with a total stop system.

When the trigger is released the motor

is shut off automatically. When the

trigger is pressed again the motor will

automatically start. The time between

release and engagement must not be

less than 4-5 seconds. DO NOT leave

the unit in automatic stop mode for

more than 15 minutes.

Figure 3

Figure 4

fan jet

jet stream

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments