Delta 22-785 Instruction Manual download pdf (Page 6)

Fig. A

GROUNDED OUTLET BOX

CURRENT

CARRYING

PRONGS

GROUNDING BLADE

IS LONGEST OF THE 3 BLADES

POWER CONNECTIONS

MOTOR SPECIFICATIONS

GROUNDING INSTRUCTIONS

3. Grounded, cord-connected machines intended for

use on a supply circuit having a nominal rating

between 150 - 250 volts, inclusive:

If the machine is intended for use on a circuit that has an

outlet that looks like the one illustrated in Fig. C, the

machine will have a grounding plug that looks like the

plug illustrated in Fig. C. Make sure the machine is

connected to an outlet having the same configuration as

the plug. No adapter is available or should be used with

this machine. If the machine must be re-connected for

use on a different type of electric circuit, the re-

connection should be made by qualified service

personnel; and after re-connection, the machine should

comply with the National Electric Code and all local codes

and ordinances.

Fig. C

GROUNDED OUTLET BOX

CURRENT

CARRYING

PRONGS

GROUNDING BLADE

IS LONGEST OF THE 3 BLADES

A separate electrical circuit should be used for your machines. This circuit should not be less than #12 wire and should be

protected with a 20 Amp time lag fuse. If an extension cord is used, use only 3-wire extension cords which have 3-prong

grounding type plugs and matching receptacle which will accept the machine’s plug. Before connecting the machine to the

power line, make sure the switch (s) is in the “OFF” position and be sure that the electric current is of the same characteristics

as indicated on the machine. All line connections should make good contact. Running on low voltage will damage the

machine.

DO NOT EXPOSE THE MACHINE TO RAIN OR OPERATE THE MACHINE IN DAMP LOCATIONS.

Your machine is wired for 240 volts, 60 HZ alternating current. Before connecting the machine to the power source,

make sure the switch is in the “OFF” position.

THIS MACHINE MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM

ELECTRIC SHOCK.

NOTE: In Canada, the use of a temporary adapter is not

permitted by the Canadian Electric Code.

IN ALL CASES, MAKE CERTAIN THAT THE

RECEPTACLE IN QUESTION IS

PROPERLY GROUNDED. IF YOU ARE NOT

SURE, HAVE A QUALIFIED ELECTRICIAN

CHECK THE RECEPTACLE.

1. All grounded, cord-connected machines:

In the event of a malfunction or breakdown, grounding

provides a path of least resistance for electric current to

reduce the risk of electric shock. This machine is equipped

with an electric cord having an equipment-grounding

conductor and a grounding plug. The plug must be plugged

into a matching outlet that is properly installed and grounded

in accordance with all local codes and ordinances.

Do not modify the plug provided - if it will not fit the outlet,

have the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding conduc-

tor can result in risk of electric shock. The conductor with

insulation having an outer surface that is green with or

without yellow stripes is the equipment-grounding

conductor. If repair or replacement of the electric cord or

plug is necessary, do not connect the equipment-grounding

conductor to a live terminal.

Check with a qualified electrician or service personnel if the

grounding instructions are not completely understood, or if

in doubt as to whether the machine is properly grounded.

Use only 3-wire extension cords that have 3-prong grounding

type plugs and matching 3-conductor receptacles that

accept the machine’s plug, as shown in Fig. A.

Repair or replace damaged or worn cord immediately.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments

Delta 22-785 Instruction Manual Page 6

Comments to this Manuals