Delta 22-785 Instruction Manual download pdf (Page 8)

1 - Top cover

2 - Cord clamp

3 - Knife setting gage

4 - Open end wrench (14 and 17mm)

5 - Open end wrench (10 and 12mm)

6 - M6x1x16mm hex flange screw (4) - for fastening

top cover to machine

7 - Raising and lowering handwheel

8 - Handle for raising and lowering handwheel

9 - Hex wrench (2.5mm)

10 - Hex wrench (3mm)

11 - Hex wrench (5mm)

12 - Hex wrench (6mm)

13 - Key for raising and lowering handwheel

14 - Decal for raising and lowering handwheel

15 - M10 flat washer for raising and lowering

handwheel

16 - M10x1.5 hex nut for raising and lowering

handwheel

Fig. 3

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from

all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,

gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household

floor paste wax.

ASSEMBLY

ASSEMBLY TOOLS REQUIRED

ASSEMBLY TIME ESTIMATE

1) - Open end wrench (10 and 12mm) - provided 5) - Hex wrench (3mm) - provided

2) - Open end wrench (14 and 17mm) - provided 6) - Hex wrench (2.5mm) - provided

3) - Hex wrench (6mm) - provided 7) - 10, 12, 14, 17mm Sockets - not provided

4) - Hex wrench (5mm) - provided 8) - 2 - 2 x 4’s - not provided

Assembly for this machine takes approximately 2 hours.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Delta 22-785 Instruction Manual Page 8